Brake Caliper - Honda CX650C 1983 Shop Manual

HYDRAULBC BRAKE
BRAKE CALBPER
REMOVAL
Place a clean container under the caliper and
disconnect the brake hose from the caliper.
CAUTION
I
Avoid spilling broke fluid on painted surfaces.
I
Remove the caliper bolt and caliper.
PIVOT COLLAR BOOTS
DISASSEMBLY
Remove the following:
- pads and pad spring.
- caliper pivot collar and boots.
-
pistons from the caliper.
PAD SPRING
If necessary, apply compressed air to the caliper
fluid inlet to get the piston out. Place
a
shop rag
under the caliper to cushion the piston when i t is
expelled. Use the air in short spurts.
I
Do not bring the nozzle too close to the inlet.
I
Examine the pistons and cylinders for scoring,
scratches or other damage and replace i f necessary.
Bate of Issue: December, 1982
O I-IONDA MOTOR
CO.,
LTD.