set intelligent-multicast client-leave-processing
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Configures processing of client port leave messages. The default state of
this command is disabled.
To Enable:
set intelligent-multicast client-leave-processing enable
To Disable:
set intelligent-multicast client-leave-processing disable
The following example enables the processing of intelligent-multicast
client-leave-processing messages.
(configure)# set intelligent-multicast client-leave-processing enable
P550R, P580, P880, and P882.
Intelligent Multicast
10-15