Table of Contents
Advertisement
Chapter 34
ip vrrp (vr-id)
Command Mode
Description
Syntax
Sample Output
Systems
34-4
Interface Configuration.
Creates a virtual router with the specified VRID and address. Use the no
form of this command to remove a virtual router.
To Configure:
ip vrrp <vr-id> address <ip-address>
To Remove:
[no] ip vrrp <vr-id> address <ip-address>
Table 34-1. Parameters, Keywords, Arguments
Name
Definition
<vr-id>
The ID of the virtual router. The range is 1-255.
<ip-address>
The IP address of the virtual router.
The following example creates a virtual router with a vr-id of 1 and address
of 10.0.1.2 on an interface labeled boston.
(config-if:boston)# ip vrrp 1 address 10.0.1.2
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
