Ipx Output-Rip-Delay - Avaya 106760804 Command Reference Manual

ipx output-rip-delay

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Interface Configuration.
Sets the interpacket delay for RIP updates sent on a single interface. The no
form of this command results in no interpacket delay. The default state is
enabled, which is a 55-millisecond delay.
To Enable: ipx output-rip-delay
To Disable: [no] ipx output-rip-delay
The following example enables the interpacket delay for IPX output RIP
updates sent out on an interface labeled "boston".
(config-if:boston)# ipx output-rip-delay
P550R, P580, P880, and P882.
IPX
13-13