Set Lgmp Server Priority - Avaya 106760804 Command Reference Manual

set lgmp server priority

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Sets the LGMP server ID priority. Excluding the parameter sets the priority
to its default of 128.
set lgmp server priority [<server-priority>]
Table 10-14. Parameters, Keywords, Arguments
Name Definition
<server-priority> Specifies the most significant byte of the LGMP Server ID.
The lower four bytes are defined by the IP address of the
interface and VLAN associated with the particular LGMP
Server. The server priority can make LGMP servers on a
device distributors or non-distributors.
The lowest LGMP Server ID wins the distributor election.
The range is 0 to 255.
The following example sets the LGMP server priority to 140.
(configure)# set lgmp server priority to 140
LGMP Server ID Priority successfully set to 140
P550R, P580, P880, and P882.
Intelligent Multicast
10-27