Set Port Intrusion-Trap - Avaya 106760804 Command Reference Manual

set port intrusion-trap

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Enables or disables the switch port intrusion trap.
To Enable: set port intrusion-trap {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>} enable
To Disable: set port intrusion-trap {<mod-num> | <mod-swport-
range>} disable
Table 21-19. Parameters, Keywords, Arguments
Name Definition
<mod-num> Specifies the number of the module where every switch port on
that module has the ability to use or ignore frame tag.
<mod-swport- Specifies a range of switch ports that are able to use or ignore
range> frame tags.
The following example enables the switch port intrusion trap on module in
slot 3.
(configure)# set port intrusion-trap 3
P550R, P580, P880, and P882.
Port
21-21