Table of Contents
Advertisement
Chapter 29
set fabric configure-redundant-hardware
Command Mode
Description
Syntax
Sample Output
Systems
29-2
Global Configuration.
Enables or disables redundant (switch fabric) hardware. The default setting
is disabled.
This command does not have reverse mapping. It is not saved to the running
or startup configuration file. The configuration is both user and run-time
modified.
To Enable:
set fabric configure-redundant-hardware enable
To Disable:
set fabric configure-redundant-hardware disable
The following example disables the redundant hardware.
(configure)# set fabric configure-redundant-hardware disable
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
