Table of Contents
Advertisement
Chapter 19
ip ospf poll interval
Command Mode
Description
Syntax
Sample Output
Systems
19-22
Interface Configuration.
Specifies the poll interval time. The valid range is 1 to 3600 seconds. The
default setting is 120 seconds. The no command restores the default setting.
To Configure:
To Restore Default:
Table 19-15. Parameters, Keywords, Arguments
Name
Definition
<seconds>
Time in seconds between retransmissions. It must be greater
than the expected round-trip delay between any two routers on
the attached network. The range is 1 to 3600 seconds.
The following command sets the poll interval time on interface 123 to 2000
seconds.
(config-if:123)# ip ospf poll-interval 2000
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip ospf poll-interval <seconds>
[no] ip ospf poll-interval
Advertisement
Table of Contents
