ipx sap-multiplier
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Interface Configuration.
Sets the interval at which a network or server's SAP entry ages out. The no
form of this command restores the default, which is three times the SAP
update interval.
To Configure:
To Restore Default:
Table 13-10. Parameters, Keywords, Arguments
Name
Definition
<multiplier>
The multiplier used to calculate the interval SAP routing table
entries age out. This can be any positive number.
The value you specify is multiplied by the SAP update interval
to determine the aging-out interval.
The following example sets the interval at which the SAP entry goes out to
20 on an interface labeled "boston".
(config-if:boston)# ipx sap-multiplier 20
P550R, P580, P880, and P882.
ipx sap-multiplier <multiplier>
[no] ipx sap-multiplier
IPX
13-25