Chapter 12
default-metric
Command Mode
Description
Syntax
Sample Output
Systems
12-2
Interface Configuration.
Sets the default RIP route metric. The no form of this command restores the
default value. The default setting is 1.
To Configure:
To Restore Default:
Table 12-1. Parameters, Keywords, Arguments
Name
Definition
<metric>
The default RIP route metric value. The range is 0 to 15. The
default setting is 1.
The following example sets the default RIP metric value on the interface
labeled "boston" to 10.
(config-if:boston)# default-metric 10
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
default-metric <metric>
no default-metric