Table of Contents
Advertisement
snmp-server group
Command Mode
Description
CAUTION:
Syntax
Document No. 10-300090, Issue 1
Global Configuration.
Creates or modifies a group.
The no command deletes a specific group or all groups of a specific group
name (if multiple groups have the same group name). If multiple groups
have the same group name, you must enter the appropriate security keyword
(noAuth, auth, or priv) to delete one of the groups. If you do not enter a
security keyword, all groups of the group name that you enter are deleted.
Avaya recommends that you not modify the predefined groups.
When you install v6.0, the existing community strings are assigned to
these predefined groups. If you modify them, the community strings
may lose their access to the switch. For more information on the
migration of existing community strings, Chapter 5, "Configuring
SNMP," in User Guide for the Avaya P580 and P882 Multiservice
Switches, Software Version 6.1.
To Configure:
snmp-server group <groupname> {noAuth | auth | priv}
[read <readview>] [write <writeview>] [notify
<notifyview>]
To Delete:
no snmp-server group <groupname> {noAuth | auth |
priv}
Table 25-5. Parameters, Keywords, Arguments
Parameter
<groupname>
noAuth
auth
priv
Definition
The name of the group that you want to create or
modify. The group name can range from 1 to 32
alphanumeric characters.
Requires neither authentication or encryption of
PDUs.
Requires authentication but not encryption of PDUs.
Requires authentication and encryption of PDUs.
SNMP
1 of 2
25-7
Advertisement
Table of Contents
