Area Nssa - Avaya 106760804 Command Reference Manual

Chapter 19

area nssa

Command Mode
Description
Syntax
Sample Output
Systems
19-6
OSPF Router Configuration.
Configure an area as a Not So Stubby Area (NSSA). To remove the NSSA
distinction from the area, use the no form of this command.
To Enable:
To Disable:
Table 19-4. Parameters, Keywords, Arguments
Name Definition
<area-id> A decimal value or IP address that identifies an OSPF area. Use no
area <area-id> to remove an area from the software configuration.
The following command sets nssa on the indicated area.
(configure router:ospf)# area 2.0.0.0 nssa
The following command removes nssa from the indicated area.
(configure router:ospf)# no area 2.0.0.0 nssa
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
area <area-id> nssa
[no] area <area-id> nssa