Chapter 30
boot system flash
Command Mode
Description
Syntax
Sample Output
Systems
30-4
Global Configuration.
Specifies which system image the switch loads at startup. Configures the
image to boot from the FEPROM. The no form of this command restores
the default system flash setting (app1).
boot system flash {app1 | app2 | cardapp1 | cardapp2}
Table 30-1. Parameters, Keywords, Arguments
Name
app1 | app2
cardapp1 | cardapp2
The following example sets the system image that the switch loads at
startup to cardapp2 on the pcmcia.
(configure)# boot system flash cardapp2
Boot flag set to 'cardapp2'.
P580 and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
Choose app1 or app2.
Choose cardapp1 or cardapp2.