Table of Contents
Advertisement
Chapter 3
appletalk access-group
Command Mode
Description
Syntax
Sample Output
Systems
3-2
Interface Configuration.
Assign an access list to an Appletalk interface. The no form of this
command removes the access list from the interface.
To Enable:
appletalk access-group <access-list-number>
To Disable:
no appletalk access-group <access-list-number>
Table 3-1. Parameters, Keywords, Arguments
Name
<access-list-number>
The following example enables access-group 625 to an Appletalk interface.
(config-if:serial0)# appletalk access-group 625
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
A decimal value that specifies the identifier of the
access list. This is a number between 600 and 663.
Advertisement
Table of Contents
