Area Stub - Avaya 106760804 Command Reference Manual

Chapter 19

area stub

Command Mode
Description
Syntax
Sample Output
Systems
19-8
OSPF Router Configuration.
Defines an area as a stub area. Use the no form of this command to remove
the stub area distinction.
To Enable: area <area-id> stub
To Disable: [no] area <area-id> stub
Table 19-6. Parameters, Keywords, Arguments
Name Definition
<area-id> IP address that represents the area-id for the system.
The following command removes a stub area on the indicated area.
(configure router:ospf)# no area 2.0.0.0 stub
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1