Ip Multicast Prune-Source - Avaya 106760804 Command Reference Manual

ip multicast prune-source

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Interface Configuration.
Configures the host address used in DVMRP prune packets forwarded on
this interface. The no form of this command restores the default, which is
host-addr.
To Configure: ip multicast prune-source {host-addr | network-addr}
To Restore [no] ip multicast prune-source
Default:
Table 7-10. Parameters, Keywords, Arguments
Name Definition
host-addr The full host address is used in the prune packet for the source
address.
network-addr Only the network portion of the address is used in the prune
packet.
The following example configures the DVRMP prune packets to the host
address for interface 1.
(configure if:1)# ip multicast prune-source host-addr
P550R, P580, P880, and P882.
DVMRP
7-13