set console databits
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Sets the console serial port's databit width. The default value is 8.
* Note: This command is not applicable when the console serial port is
configured in PPP mode. The input will not be accepted or
stored when the console serial port is configured in PPP mode.
However, if the console serial port is configured as TTY mode
and the databits width is configured, the console serial port can
be changed to PPP mode and the databit width is saved until
TTY mode is restored.
set console databits {7 | 8}
Table 5-2. Parameters, Keywords, Arguments
Name
Definition
{7 | 8}
This is a required parameter. The number indicates the number
of bits used in the data stream.
This example sets the databit width for the console serial port to 7.
(configure)# set console databits 7
P550R, P580, P880, and P882.
Console
5-3