Ip Mac-Format - Avaya 106760804 Command Reference Manual

Chapter 11

ip mac-format

Command Mode
Description
Syntax
Sample Output
Systems
11-28
Interface Configuration.
Sets the MAC format of the IP interfaces. The no form of this command
restores the default ethv2.
To Configure:
To Restore Default:
Table 11-15. Parameters, Keywords, Arguments
Name Definition
{ethv2 | snap} Set the MAC format of the IP interface to either ethv2, which
is the default, or to snap (Subnetwork Access Protocol).
The following example sets the MAC format of the IP interfaces, on the
interface labeled boston, to the Subnetwork Access Protocol (snap).
(config-if:boston)# ip mac-format snap
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip mac-format {ethv2 | snap}
no ip mac-format {ethv2 | snap}