Table of Contents
Advertisement
Chapter 11
ip route-preference
Command Mode
Description
Syntax
Sample Output
Systems
11-42
Global Configuration.
Assigns preference values to routes. The IP routing table uses these values
to determine the best routes. The no form of this command restores the
default settings.
To Configure:
ip route-preference {local | rip | ospf-intra | ospf-inter |
ospf-extra | static-hp | static-lp <value>
To Restore
[no] ip route-preference {local | rip | ospf-intra | ospf-
Default:
inter | ospf-extra | static-hp | static-lp}
Table 11-21. Parameters, Keywords, Arguments
Name
{local | rip | ospf-intra |
ospf-inter | ospf-extra |
static-hp | static-lp}
<value>
The following sample assigns a preference of 100 to RIP routes.
(configure)# ip route-preference rip 100
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
The route keywords are:
• local - locally connected routes.
• rip - route learned via the RIP protocol.
• ospf-intra - OSPF intra-area routes.
• ospf-extra - OSPF external routes.
• static-hp - high preference static routes.
• static-lp - low preference static routes.
Preference value assigned to the specified route. The
higher the value, the more preferable the route. Valid
preference values range from 0 to 255.
Advertisement
Table of Contents
