Ip Ospf Ext-Route-Metric - Avaya 106760804 Command Reference Manual

ip ospf ext-route-metric

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Sets the metric type used for external routes to type1 or type2. Use the no
form of this command to restore default values. The default values are:
local (type1)
rip (type2)
static-hp (type2)
static-lp (type-2)
To Configure: ip ospf ext-route-metric {local | rip | static-hp | static-lp}
{type1 | type2}
To Restore [no] ip ospf ext-route-metric {local | rip | static-hp | static-
Default: lp}
Table 19-12. Parameters, Keywords, Arguments
Name Definition
local Specifies whether imported local routes are advertised in OSPF with
type 1 (internal) or type 2 (external) metrics.
rip Specifies whether imported RIP routes are advertised in OSPF with
type 1 (internal) or type 2 (external) metrics.
static-hp Specify whether imported high preference static routes are advertised
in OSPF with type 1 (internal) or type 2 (external) metrics.
static-lp Specify whether imported low preference static routes are advertised in
OSPF with type 1 (internal) or type 2 (external) metrics.
The following command sets the metric type for RIP used for external
routes to Type 2
(configure)# ip ospf ext-route-metric rip type2
P550R, P580, P880, and P882.
OSPF
19-17