Set Port Default-Priority - Avaya 106760804 Command Reference Manual

set port default-priority

Command Mode
Description
Syntax
Sample Output
Document No. 10-300090, Issue 1
Global Configuration.
Sets the priority of a physical port.
set port default-priority {{<mod-num> | <mod-swport-range>}[..., {<mod-
num> | <mod-swport-range>}] | all-ports} <priority>
Table 23-9. Parameters, Keywords, Arguments
Name
<mod-num>
<mod-swport-range>
all-ports
<priority>
The following command sets the priority to 0 for all ports on the module in
slot 3.
(configure)# set port default-priority 3 0
The following command sets the priority to 5 for ports 1 through 5 on the
module in slot 3.
set port default-priority 3/1-5 5
(configure)#
Definition
The slot number of a module. If you specify <mod-
num>, the priority is set for all ports on the module.
The slot number of a module, and, either a port number,
or a range of port numbers having the format Px-Py. For
example:
• To specify port 1 on the module in slot 3, enter 3/
1.
• To specify ports 1 through 5 on the module in slot
3, enter 3/1-5.
If you specify <mod-swport-range>, the priority is set
for the port or range of ports on the module that you
specify.
All ports in the chassis. If you specify all-ports, all
ports on all modules in the chassis are set with the same
priority.
The priority that you want to assign to the port or port
range. Enter a number between 0 and 7. The highest
priority is 7.
80-Series QoS
23-17