Ip Rip Default-Route-Mode - Avaya 106760804 Command Reference Manual

ip rip default-route-mode

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Interface Configuration.
Sets the RIP default route characteristics. The no form of this command
disables the default route characteristics.
To Configure: ip rip default-route-mode {talk-only | listen-only |
talk-listen | disable}
To Restore no ip rip default-route-mode
Default:
Table 12-4. Parameters, Keywords, Arguments
Name
{talk-only| listen-only|
talk-listen | disable}
The following example sets the RIP default route characteristics for
interface labeled "boston" to talk-listen mode.
(config-if:boston)# ip rip default-route-mode talk-listen
P550R, P580, P880, and P882.
Definition
The RIP default route characteristics.
• talk-only - The default route is advertised in RIP
updates but ignored on incoming neighbor
updates.
• listen-only - The default route is suppressed
from RIP updates but accepted on incoming
neighbor updates.
• talk-listen - The default route is advertised and
accepted.
• disable - The default route is not advertised or
accepted.
IP-RIP
12-5