Chapter 11
ip telnet
Command Mode
Description
Sample Output
Systems
11-48
Global Configuration
Enables or disables Telnet and changes the TCP port number for Telnet.
Valid port numbers are 23 or a port number from 9000 through 65355.
Once you change the TCP port number for Telnet, only users who know the
new port number can start Telnet sessions to the switch.
To Enable:
To Disable:
Table 11-25. Parameters, Keywords, Arguments
Name
Definition
<tcp-telnet-port>
The TCP port number that you want to use for Telnet
requests. The default setting is port 23.
Valid port numbers are 23 or a port number from 9000
through 65355.
Once you change the TCP port number for Telnet, only
users who know the new port number can start Telnet
sessions to the switch.
The following example changes the TCP port for Telnet requests to port
9998:
(configure)# ip telnet port 9998
TCP Telnet listening port was changed successfully
to 9998
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip telnet {port [<tcp-new-port>] [enable] |
[enable]}
no ip telnet