Chapter 23
set port use-diffserv
Command Mode
Description
Syntax
23-30
Global Configuration.
Sets a port to classify bridged IP traffic by its DiffServ code point (DSCP).
To Enable:
set port use-diffserv {{<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] |
all-ports} on
To Disable:
set port use-diffserv {{<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] |
all-ports} off
Table 23-17. Parameters, Keywords, Arguments
Name
<mod-num>
<mod-swport-range>
all-ports
{on | off}
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
The slot number of a module. If you specify <mod-
num>, the switch ignores tag priorities on all ports of
the module.
The slot number of a module, and, either a port number,
or a range of port numbers having the format Px-Py.
For example:
• To specify port 1 on the module in slot 3, enter 3/
1.
• To specify ports 1 through 5 on the module in
slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the switch ignores
tag priorities on the port or range of ports on the module
in the slot that you specify.
All ports in the chassis. If you specify all-ports, all
ports on all modules in the chassis are set with the same
priority.
Indicates whether you want the port to ignore tag
priority. Enter on for the port to ignore the tag priority.