show port
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
User.
Displays the QoS settings for a physical port. This command also displays
the priority of the port, if the port is set to ignore 802.1p tag priority, and if
the port is set to use the DSCP for bridged IP traffic.
show port [{<mod-num> | <mod-swport-range>}[...,{<mod-num> |
<mod-swport-range>}]]
Table 23-18. Parameters, Keywords, Arguments
Name
<mod-num>
<mod-swport-range>
The following example displays the QoS settings for module 3.
> show port 3
P550R and P880, 80-series modules only.
P580 and P882.
Definition
The slot number of a module. If you specify <mod-
num>, the switch displays the QoS settings for all ports
on the module in the slot that you specify.
The slot number of a module, and, either a port number,
or a range of port numbers having the format Px-Py.
For example:
• To specify port 1 on the module in slot 3, enter 3/
1.
• To specify ports 1 through 5 on the module in
slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the switch
displays the QoS settings for the port or range of ports
on the module in the slot that you specify.
80-Series QoS
23-33