Table of Contents
Advertisement
Chapter 13
ipx gns-response-delay
Command Mode
Description
Syntax
Sample Output
Systems
13-10
Interface Configuration.
Sets the delay time (milliseconds) when responding to IPX GNS requests.
The no form of this command restores the default. The default is zero,
which indicates no delay.
To Configure:
To Restore Default:
Table 13-4. Parameters, Keywords, Arguments
Name
Definition
<milliseconds>
The time, in milliseconds, that the switch waits after
receiving a GNS request from an IPX client before
responding with a server name to that client. The range is 0
to 5000 milliseconds.
The following example sets the delay time for an interface labeled "boston"
to respond to IPX GNS requests to 200 milliseconds.
(config-if:boston)# ipx gns-response-delay 200
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ipx gns-response-delay <milliseconds>
[no] ipx gns-response-delay
Advertisement
Table of Contents
