Ip Ospf Hello-Interval - Avaya 106760804 Command Reference Manual

Chapter 19

ip ospf hello-interval

Command Mode
Description
Syntax
Sample Output
Systems
19-18
Interface Configuration.
Specifies the hello interval time. The hello interval time is the time between
hello packets that the router sends on the interface. The value range is 1 to
65535. The default setting is 10. The no command restores the default
setting.
To Configure:
To Restore Default:
Table 19-13. Parameters, Keywords, Arguments
Name Definition
<seconds> Unsigned integer that specifies the interval in seconds. The value
must be the same for all nodes on a specific network. The value
range is 1 to 65535. The default setting is 10.
The following command sets the Hello interval time to 60 seconds.
(config-if:intf3)# ip ospf hello-interval 60
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip ospf hello-interval <seconds>
[no] ip ospf hello-interval