Chapter 7
ip dvmrp timers basic
Command Mode
Description
Syntax
Sample Output
Systems
7-12
DVMRP Router Configuration.
Adjusts the DVMRP network timers. Use the no form of this command to
return to the default values.
To Configure:
ip dvmrp timers basic <rte-update> <rte-expire>
<rte-holddown>
To Restore
[no] ip dvmrp timers basic
Default:
Table 7-9. Parameters, Keywords, Arguments
Name
Definition
<rte-update>
Configures the DVMRP route reporting interval. The range of
frequencies at which updates are sent is 30 to 90 seconds. The
default setting is 60 seconds.
<rte-expire>
Interval of time, in seconds, after which a DVMRP route
expires. The valid range is 70 to 190 seconds. The default
value is 140 seconds.
<rte-holddown>
The amount of time, in seconds, that must pass before the route
is removed from the routing table. The valid range is 120-380
seconds. The default setting is 120 seconds.
The following example configures the IP DVMRP timers basic with route
update time of 35 seconds, a route expiration time of 75 seconds and route
holddown time of 145 seconds.
(configure router:dvmrp)# ip dvmrp timers basic 35 75 145
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1