Table of Contents
Advertisement
Chapter 12
network
Command Mode
Description
Syntax
Sample Output
Systems
12-10
RIP Router Configuration.
Enables RIP routing on a network or networks. The no form of this
command disables RIP routing.
To Enable:
network <ip-addr> [<wildcard-mask>]
To Disable:
no network <ip-addr> [<wildcard-mask>]
Table 12-8. Parameters, Keywords, Arguments
Name
Definition
<ip-addr>
IP address of the network of directly connected networks.
<wildcard-
The inverse of a network mask. Enter a 32-bit number in four-
mask>
part, dotted decimal format. Place ones in the bit positions that
you want to mask.
This parameter specifies a range of IP addresses. For example,
to specify all IP addresses in the 10.10.70 subnet, enter
10.10.70.0 0.0.0.255.
The following example enables RIP on the 11.0.0.0 subnet which is
connected to the 11.0.4.5 interface:
(configure router:rip)# network 111.0.4.5 0.255.255.255
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
