Table of Contents
Advertisement
Chapter 21
set port-redundancy name
Command Mode
Description
Syntax
Systems
21-38
Global Configuration.
Creates or deletes a port redundancy pair. After creating a redundancy pair,
use the
set port-redundancy
for all configured pairs.
* Note: You must globally disable Spanning Tree and Rapid Spanning
Tree before you can create a port redundancy pair.
To Create:
set port-redundancy name <redundant-name>
<primary-port> <secondary-port>
To Delete:
no port-redundancy <redundant-name>
Table 21-32. Parameters, Keywords, Arguments
Name
<redundant -name>
<primary-port>
<secondary-port>
P580 and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
command to enable port redundancy globally
Definition
A unique name for the port redundancy pair.
The primary port in the pair.
The secondary port in the pair.
Advertisement
Table of Contents
