Define The Printer Or Plotter Settings - HP 8712ES User Manual

Defining a PCL5
Printer
Define the Printer or Plotter Settings
You will only have to do this setup once if you make all your hardcopies
with the same printing or plotting device.
Press
HARDCOPY
Define Plotter , depending on which type of device you are using. Note
that only one of these choices is selectable at a time.
Three procedures follow. Use
"Defining a Printer" on page 4-75
go to "Defining a Plotter" on page
Make the following selections in the analyzer menus:
1. Press Restore Defaults
printer. The defaults are:
Parameter
Monochrome/Color
Orientation
Auto Feed
Top Margin
Left Margin
Print Width
ES User's Guide
Connecting and Configuring Printers and Plotters
, Define PCL5 , and then
"Defining a PCL5 Printer,"
if you are using a printer. Otherwise,
4-77.
to restore the default parameters for a
Monochrome
Portrait
ON
0.00 mm
0.00 mm
150 mm (5.91 in)
Using Instrument Functions
Define Printer
below, or
Default
or
4-73