Table of Contents
Advertisement
4.8.3
Setting the display mode
To set the display mode, press the button as follows:
Pressing the button
starting at display mode A
-
Press once
Press twice
Press three times
Depending on the set display mode, the "L1", "L2" LEDs and the port LEDs show different
information.
If you do not press the button for longer than 1 minute, the device automatically changes to
display mode A.
4.9
Configuration License PLUG
The Configuration and License PLUG (CLP) is a USB storage medium for backing up and
exchanging data and licenses.
The CLP has a USB type C interface and can be used with the following devices that have a
corresponding interface:
• Siemens products
• Personal computers (PCs), such as desktop PCs, tablet PCs, laptops, or smartphones
4.9.1
Position
The CLP slot is located on the top of the device.
Figure 4-7
SCALANCE XC-300
Operating Instructions, 10/2022, C79000-G8976-C584-01
Position of the CLP slot using the example of a SCALANCE XC-300
4.9 Configuration License PLUG
LED status
DM1
DM2
Off
On
Off
Off
On
On
Description of the device
Display mode
Display mode A
Display mode B
Display mode C
Display mode D
39
Advertisement
Table of Contents
