Advertisement
OCX1100 Switch Hardware Guide
72
NOTE:
One person must be available to lift the switch while another secures
it to the rack.
CAUTION:
If you are mounting multiple units on a rack, mount the heaviest
unit at the bottom of the rack and mount the other units from the bottom of
the rack to the top in decreasing order of the weight of the units.
To mount the switch on four posts of a rack:
Place the switch on a flat, stable surface.
1.
Align the holes on the front rack-mounting brackets with the screw holes on the side
2.
of the chassis and attach the front rack-mounting brackets to the switch by using the
front rack-mounting bracket screws. See
Figure 21: Attaching the Front Rack-Mounting Brackets to the Switch
Chassis
Align the holes on the rack-mounting slider brackets with the screw holes on the back
3.
of the rack posts.
Attach the rack-mounting slider brackets to the rack posts by using appropriate
4.
rack-mounting screws. Tighten the screws by using a screwdriver. See
Figure 22 on page
73.
NOTE:
The ears of the rack-mounting slider brackets must be facing
backward and outward.
Figure 21 on page
72.
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Chapters
