Advertisement
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
CAUTION:
You must remove only one fan module at a time for replacement
from the rear panel of the chassis. The switch continues to operate without
thermal shutdown for a limited period of time (30 seconds) during the
replacement of a fan module.
See these topics for instructions for installing and removing components:
Installing an AC Power Supply in an OCX1100 Switch on page 77
Removing an AC Power Supply from an OCX1100 Switch on page 111
Installing a DC Power Supply in an OCX1100 Switch on page 79
Removing a DC Power Supply from an OCX1100 Switch on page 114
Installing a Fan Module in an OCX1100 Switch on page 105
Removing a Fan Module from an OCX1100 Switch on page 106
Installing a Transceiver in an OCX1100 Switch
Removing a Transceiver on page 119
Cooling System and Airflow in an OCX1100 Switches on page 17
AC Power Supply in OCX1100 Switches on page 23
DC Power Supply in OCX1100 Switches on page 25
Pluggable Transceivers Supported on OCX1100 Switches on page 47
Chapter 10: Installing the Switch
75
Advertisement
Chapters
