Advertisement
Copyright © 2017, Juniper Networks, Inc.
Figure 22: Attaching the Rack-Mounting Slider Brackets to the Rack Posts
Position the switch so that the rack-mounting slider brackets align horizontally within
5.
the two rows of rack-mounting slider bracket pegs located on the side panel of the
switch.
Slide the switch into the rack-mounting slider brackets so that the brackets fit into
6.
the space between the two rows of rack-mounting slider pegs of the switch.
Have a second person secure the front rack-mounting brackets to the front of the
7.
rack posts by using appropriate rack-mounting screws. Tighten the screws by using
a screwdriver. See
Figure 23 on page
Chapter 10: Installing the Switch
74.
73
Advertisement
Chapters
