Advertisement
OCX1100 Switch Hardware Guide
Related
Documentation
84
Insert the power cord plug into a DC power source outlet.
6.
If the DC power source outlet has a power switch, set it to the on (
7.
Verify that the LEDs on each power supply are lit green.
8.
If the LED is lit amber, remove power from the power supply, and replace the power
supply (see
"Removing a DC Power Supply from an OCX1100 Switch" on page
Do not remove the power supply until you have a replacement power supply ready:
the power supplies or a cover panel must be installed in the switch to ensure proper
airflow.
CAUTION:
We recommend that you install either a replacement power
supply or a cover panel in an empty power supply slot to prevent chassis
overheating and dust accumulation.
DC Power Supply in OCX1100 Switches on page 25
Power Supply LEDs in OCX1100 Switches on page 27
|
) position.
Copyright © 2017, Juniper Networks, Inc.
114).
Advertisement
Chapters
