Sfp+ Port And Qsfp+ Port Leds On Ocx1100 Switches; Figure 6: Leds On The Management Port And Console Port On An Ocx1100-48Sx; Table 8: Link And Activity Led On The Management Port Of An Ocx1100-48Sx; Table 9: Status Led On The Console Port Of An Ocx1100-48Sx Switch - Juniper OCX1100 Hardware Manual

OCX1100 Switch Hardware Guide
Table 8: Link and Activity LED on the Management Port of an OCX1100-48SX Switch
LED Color
Link and activity Green

Table 9: Status LED on the Console Port of an OCX1100-48SX Switch

LED Color
Status Green
Related
Documentation

SFP+ Port and QSFP+ Port LEDs on OCX1100 Switches

14
Figure 6: LEDs on the Management Port and Console Port on an
OCX1100-48SX Switch
1— Link and activity LED for
Table 8 on page 14 describes the link and activity LED on the management port.
State and Description
On steadily—The port and the link are active, but there is no link activity.
Blinking—The port and the link are active, and there is link activity.
Off—The port is not active.
Table 9 on page 14 describes the status LED on the console port.
State and Description
On steadily—Console on.
Off—Console off.
OCX1100 Switches Hardware Overview on page 3
Connecting a Device to a Network for Out-of-Band Management on page 85
On an OCX1100 switch, each SFP+ port and QSFP+ port has one LED that shows the link
and activity of the port.
The following figures in this topic show the location of those LEDs:
Figure 7 on page 15 shows the location of the LEDs on the SFP+ ports.
Figure 8 on page 15 shows the location of the LEDs on the QSFP+ ports.
MGMT port 2— Status LED for CONSOLE port
Copyright © 2017, Juniper Networks, Inc.