Advertisement
OCX1100 Switch Hardware Guide
38
For the cooling system to function properly, the airflow around the chassis must be
unrestricted. See
Figure 17 on page 38
Figure 17: Front-to-Back Airflow Through OCX1100-48SX Switch Chassis
Figure 18: Back-to-Front Airflow Through the OCX1100-48SX Switch
Chassis
If you are mounting the switch on a rack or cabinet along with other equipment, ensure
that the exhaust from other equipment does not blow into the intake vents of the
chassis.
Leave at least 6 in. (15.2 cm) clearance in front of and behind the chassis for airflow.
Leave at least 24 in. (60.9 cm) clearance in front of and behind the switch for service
personnel to remove and install hardware components. See
and
Figure 18 on page 38
for reference.
Figure 19 on page
Copyright © 2017, Juniper Networks, Inc.
39.
Advertisement
Chapters
