Advertisement
CHAPTER 8
Pinout Specifications
Console Port Connector Pinout Information
Table 33: Console Port Connector Pinout Information
Pin
Signal
1
RTS Output
2
DTR Output
3
TxD Output
4
Signal Ground
5
Signal Ground
6
RxD Input
Copyright © 2017, Juniper Networks, Inc.
Console Port Connector Pinout Information on page 55
Mini-USB Port Pinout Specifications on page 56
RJ-45 Management Port Connector Pinout Information on page 56
RJ-45 to DB-9 Serial Port Adapter Pinout Information on page 57
RJ-45 Port, QSFP+ Port, SFP+ Port, and SFP Port Connector Pinout
Information on page 58
The console port on a Junier Networks device is an RS-232 serial interface that uses an
RJ-45 connector to connect to a console management device. The default baud rate for
the console port is 9600 baud.
Table 33 on page 55
provides the pinout information for the RJ-45 console connector.
NOTE:
If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to a device, use a combination of
the RJ-45 to DB-9 female adapter and a USB to DB-9 male adapter. You
must provide the USB to DB-9 male adapter.
Description
Request to send
Data terminal ready
Transmit data
Signal ground
Signal ground
Receive data
55
Advertisement
Chapters
