Saving Sent and Received Data (Transmission Data
Save)
This section describes the transmission data save function and how to set it.
The transmission data save function automatically saves sent e-mails (Internet fax,
FaxServer), received e-mails (Internet fax), sent faxes, and received faxes in a specified
network folder. For sent e-mails, only attachment files are saved. You can only specify one
network folder for each setting, but you can specify a different save destinations for sent
data and received data respectively.
The data is saved as a PDF or TIFF file depending on the file format of the source data.
Note
The transmission data save function is not available when using the following functions.
Real time transmission
Polling transmission by using Fcode bulletin board communication
Reception by using Fcode confidential communication
Secure Receive
1.
Open the Web page of this machine.
About the IP Address of this machine, refer to
Machine" on "Basic Operations".
2.
Log in as the administrator.
3.
Select [Transmission Settings].
You must set a server in advance.
Before Using Scan To E-mail
4.
Select [Transmission Settings].
"Checking the Information of the
573