Table of Contents
Advertisement
Removing Show-Through (Show-Through Removal)
Show-Through Removal removes show-through of text from the reverse side. You can select
the removal level from OFF, Low, Middle, or High.
Note
This function is enabled only when [Background Removal] is set to [Auto].
This function is enabled only when [Document Type] is set to [Text] or [Text&Photo].
1.
Press [Copy] or the
2.
Set a document in the ADF or on the document glass.
3.
Press [Show-Thr. Rem.] on the [Image Settings] screen on the
[Image Settings] tab.
4.
Select a value.
Memo
[Middle] is set by default.
If light color becomes too faint with Middle (default value), set to [Low] (show-through
may not be removed completely).
If show-through is not completely removed with Middle (default value), set to [High]
(light color may not be represented).
For documents printed only one side or when reproducing light color, set to [OFF]. (For
documents printed on two side, show-through remains.)
5.
Press the
(COPY) button.
(START) button.
129
Advertisement
Table of Contents
