Table of Contents
Advertisement
Specifying a Scan Resolution (Resolution)
You can select a resolution to obtain the most suitable quality.
1.
Press [Fax/Internet Fax] or the
2.
Set a document in the ADF or on the document glass.
3.
Press [Fax].
4.
Press [Resolution] on the [Fax] or [Basic] tab.
Memo
Alternatively, you can set this setting on the [Basic] tab or from [Function Settings].
5.
Select a resolution.
Memo
[Extra-Fine] may not be available depending on the receiver's machine.
If you select [Fine], [Extra-Fine], or [Photo], it takes long to scan a document.
6.
Specify a destination.
Specifying a Destination (Direct Entry)
Specifying a Destination (Phone Book)
Specifying a Destination (One-touch Button)
Specifying a Destination (Transmission History and Reception History)
7.
Change other settings if necessary, and then press the
button.
Topics
You can change other settings for fax transmissions.
Setting Scanning for Transmission
Sending a Fax (Procedure)
(FAX) button.
492
(START)
Advertisement
Table of Contents
