Specifying A Reduction Ratio - Oki MC853 User Manual

Setting a Print Method for When a Received Image
Exceeds Paper Size

Specifying a Reduction Ratio

Specifying a Threshold Value
The excess from the specified paper is reduced or discarded, or printed on the next sheet of
paper. For example, if the machine receives a fax that is larger than A4 with A4 paper
specified, the excess of the image is printed on the next sheet of paper.
You can avoid such situation by specifying a reduction ratio.
Specifying a Reduction Ratio
The reduction rate determines whether or not the machine automatically reduces the
received image to the specified paper size. [Auto] automatically reduces the image and
[100%] prints the image without reduction. [Rx Reduc. Rate] is set to [Auto] by factory
default.
1.
Press [Device Settings] on the touch panel.
2.
Press or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Fax Setup].
5.
Press [Other Settings].
6.
Press [Rx Reduc. Rate].
7.
Select a reduction ratio.
8.
Press [Back] until the home screen is displayed.
Specifying a Threshold Value
several times and press [Admin Setup].
534