Changing Settings - Oki MC853 User Manual

Using Image Capture (Mac OS X)
Scanning

Changing Settings

To scan using Image Capture, preparation procedure such as installation of the scanner
driver is required.
Before Using Remote Scan
You also need to set the machine in the stand-by mode for Remote Scan before starting
scanning on the computer.
How to Use Remote Scan
The ICA driver does not support Windows.
The ICA driver does not support Mac OS X 10.6.7 or earlier.
Scanning
1.
Set a document in the ADF or on the document glass.
2.
Start Image Capture on the computer.
3.
Select the machine from the list on the left side of the Image
Capture screen.
4.
Click [Scan].
Scanning starts.
5.
Select [Close Image Capture] from [Image Capture].
Changing Settings
You can adjust how a document is scanned by changing the driver settings.
The following explains each setting item.
If you display detailed information, you can adjust how a document is scanned in details.
1.
Set a document in the ADF or on the document glass.
2.
Start Image Capture on the computer.
3.
Select the machine from the list on the left side of the Image
Capture screen.
4.
Click [Display the detailed information].
274