Instructing a Fax Reception from a Telephone Remotely
(Remote Switchover Number)
If the connected telephone is remotely located, you can switch the machine to the fax
reception operation by dialing the remote switchover number on the telephone.
If the connected telephone is not a push line, press the tone button on the telephone to
switch to tone (push) signals before dialing the remote switchover number.
When dialing the remote switchover number, enter the next digit of the number within
3 seconds of dialing the previous digit.
1.
Press [Device Settings] on the touch panel.
2.
Press
or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press
or
5.
Select [Fax Setting].
6.
Press [Remote Receive Number].
7.
Select a number.
8.
Press [Back] until the home screen is displayed.
several times and press [Admin Setup].
several times and press [Fax Setup].
565