Table of Contents
Advertisement
Skipping White Pages When Scanning (White Page
Skip)
If blank pages are included in documents, you can skip the blank pages from the scanned
results.
Note
Blank pages may not be detected correctly in the following cases.
Halftone documents
Documents with extremely small printed area (e.g. blank pages with page numbers)
Memo
You can change the criteria for determining blank pages from [Device Settings] > [Admin Setup]
> [Scanner Setup] > [Scanner Adjust] > [Blank Page Skip Level].
Scanner Setup
1.
Press [Scan] or the
2.
Set a document in the ADF or on the document glass.
3.
Select a scan method.
Sending Scanned Data as an E-mail Attachment
Saving Scanned Data in USB Memory
Saving Scanned Data in a Shared Folder
Specify a destination by following the procedure for the selected scan method.
4.
Press [White Page Skip] on the [Advanced] tab to set it to [ON].
Memo
Pressing [White Page Skip] switches between [ON] and [OFF].
5.
Change other settings if necessary, and then press the
button.
(SCAN) button.
182
(START)
Advertisement
Table of Contents
