Oki MC853 User Manual page 96

Memo
If [Fit to page(98%)] is selected and the size of the document and the paper are the same,
the document is reduced to fit the paper.
When setting the zoom rate by using the 10-key pad
Enter the zoom rate from 25 to 400% by using the 10-key pad or pressing
on the touch panel, and then press [OK].
Memo
You can set the rate in units of 1%.
If you enter an incorrect value, press the
value.
When setting different zoom rates for vertical and horizontal axes
Press [Custom].
Specify the zoom rates for vertical and horizontal axes.
Enter the zoom rate from 25 to 400% by using the 10-key pad or pressing
on the touch panel, and then press [OK].
Memo
When setting different zoom rates for vertical and horizontal axes, you need to specify
the feeding tray.
You can set the rate in units of 1%.
If you enter an incorrect value, press the
value.
5.
Press the
Memo
If [Paper Feed] is set to [Auto], [Zoom] is automatically set to [100%]. To select a different
rate, set [Paper Tray], and then set [Zoom].
If [Paper Feed] is set to [Auto], the paper tray is automatically selected according to the
selected zoom rate. To use a specific paper tray, reset [Paper Feed] again.
Even if [Paper Feed] is set to [Auto], you cannot select a paper tray that holds paper other
than A3, A4 , A4
Legal13/13.5/14, Executive
specify from [Paper Feed].
If [Paper Feed] is set to [Auto], the [Paper Feed] setting automatically changes by setting
[Zoom] to [Auto]. A message is displayed on the touch panel to inform you that the setting
(START) button.
, A5 , A5 , A6 , B4, B5
, Statement
(CLEAR) button, and then enter the correct
(CLEAR) button, and then enter the correct
, B5 , Tabloid, Letter
, Statement , Folio, or 8.5 SQ. In this case,
95
, Letter ,