Table of Contents
Advertisement
Scanning Multiple Documents Continuously (Continuous
Scan)
To scan multiple documents as a single job, enable Continuous Scan mode.
In Continuous Scan mode, you can scan your documents from the ADF, document glass, or
both of them.
1.
Press [Scan] or the
2.
Set the first sheet of a document in the ADF or on the document
glass.
3.
Select a scan method.
Sending Scanned Data as an E-mail Attachment
Saving Scanned Data in USB Memory
Saving Scanned Data in a Shared Folder
Specify a destination by following the procedure for the selected scan method.
4.
Press [Continuous Scan] on the [Advanced] tab to set it to [ON].
Memo
Pressing [Continuous Scan] switches between [ON] and [OFF].
5.
Change other settings if necessary, and then press the
button.
6.
When the [Please set next document] screen is displayed, set the
next document in the ADF or on the document glass.
Note
If you set the next document to a different place, remove the document from the place
you used first.
7.
Press [Start Scan].
(SCAN) button.
177
(START)
Advertisement
Table of Contents
