Oki MC853 User Manual page 785

Copying cannot be
made to a device
by performing
cloning with the
following functions.
E-mail Address
Manager
Speed Dial
Manager
Profile Manager
Network Scan
Manager
Auto Delivery
Manager
If I perform cloning
with Auto Delivery
Manager, the
following settings
are also copied.
E-mail Address
Manager
Speed Dial
Manager
Profile Manager
[Alert Info] tab
Symptom
Cannot enable an alert
on the [Alert
Info(Detect and notify
of device events)]
screen
Information that is to be
replaced in the copy
destination device is locked
because it is being edited or
used.
If e-mails or speed dials are
used for the auto delivery
settings of the copy source
device, these settings also
need to be copied at the
same time.
Cause
[Save the Log Follow the procedure below:
setup] in this
1. Press [Device Settings], select
machine is
[Admin Setup] > [Management] >
disabled.
[Job Log Setup] > [Save Job Log],
and then select [Enable].
2. Press [Yes] on the confirmation
screen to reboot the machine.
3. Click [Update device] on the
[Alert Info(Detect and notify of
device events)] screen.
Unlock the used information
before performing cloning.
To copy only the auto
delivery settings, delete the
e-mail, speed dial, or other
settings from the copy
source device before
performing cloning.
Solution
784
-
-
Reference
Management