Skipping White Pages When Copying (White Page Skip) - Oki MC853 User Manual

Skipping White Pages When Copying (White Page Skip)

If blank pages are included in the scanned document, you can skip the blank pages when
copying.
Note
Blank pages may not be detected correctly in the following cases.
Halftone documents
Documents with extremely small printed area (e.g. blank pages with page numbers)
When N-in-1 is applied, pages are moved up if white pages are omitted.
If you make duplex copies of two-sided documents including blank pages, two sides of copies
and originals may not correspond.
Memo
You can change the criteria for determining blank pages from [Device Settings] > [Admin Setup]
> [Scanner Setup] > [Scanner Adjust] > [White Page Skip Level].
Scanner Setup
1.
Press [Copy] or the
2.
Set a document in the ADF or on the document glass.
3.
Press [White Page Skip] on the [Advanced] tab.
4.
Select White Page Skip.
[White Page Skip] is set to [ON].
5.
Press the
(COPY) button.
(START) button.
149